JAPEX, JGC, and “K” LINE Sign a Storage Site Agreement with PETRONAS and PETROS for the CCS Project in Malaysia

Japan Petroleum Exploration Co., Ltd. (JAPEX), JGC Holdings Corporation (JGC) and Kawasaki Kisen Kaisha, Ltd. (“K” LINE) (hereinafter referred collectively as the “Japan Consortium (JC)”) have agreed and signed the Storage Site Agreement (“SSA”) with PETRONAS CCS Ventures Sdn. Bhd. (PCCSV) and PETROLEUM Sarawak BERHAD (PETROS) for the M3 depleted field in offshore Sarawak, Malaysia on 26th February 2024.

The SSA not only enables the feasibility studies of the CO2 storage sites starting with the M3 depleted field (M3 CCS Project), but also the planning of relevant CO2 storage site development, including onshore terminals and transportation pipelines, as well as assessment of its techno-commercial feasibility.

This collaboration represents a significant advancement in the effort to reduce greenhouse gas emissions in the Asia Pacific (APAC) region, including Malaysia and Japan.

The signatories of the SSA were PETROS Senior Vice President, Sarawak Resource Management Nazrin Banu Shaikh S. Ahmad; PETRONAS CCS Ventures Chief Executive Officer Emry Hisham Yusoff; JAPEX Managing Executive Officer and President of Overseas Business Division II, YAMADA Tomomi; JGC Senior Executive Officer, Technology Commercialization Officer, AIKA Masahiro; and ”K”LINE Managing Executive Officer, Carbon-Neutral Promotion, KANAMORI Satoshi.

Nazrin said, “As the Resource Manager in Sarawak, this step forward signifies our commitment as Sarawak’s economic growth engine leveraging as an enabler. This is the first project for the industry and the impetus to more low-carbon solution projects. We also express our gratitude for the strong support from PETRONAS CCS Ventures and the Japanese Consortium in participating in this project in Sarawak.”

Emry said, “This collaboration is not just a strategic move to unlock potential CCS opportunities in 2 / 3 Malaysia but necessary in addressing climate change as a collective action in achieving a low-carbon future. By securely storing captured CO2 underground, CCS plays a pivotal role in decarbonizing key industries, and it is hoped that this milestone will set an impetus for other CCS initiatives within Malaysia.” “This is in line with PETRONAS CCS Ventures “ commitment in accelerating Malaysia’s potential as a prominent regional hub for CCS. The company continues to undertake deliberate actions to accelerate the development of a sustainable energy portfolio that prioritizes responsible practices,” adds Emry.

YAMADA, representing the Japanese Consortium Parties said, “We are very proud to work with PETRONAS CCS Ventures and PETROS for this epochal project and believe that expertise of each company can make great contribution for realizing the CCS value chain centered on Sarawak aiming at the decarbonization of the APAC region, including Japan.”

By executing SSA for the CCS project in Malaysia, JAPEX, JGC, “K” LINE will contribute towards carbon neutrality in 2050, including the realization of a de-carbonized society in Asia targeted by the “Asia Energy Transition Initiative (AETI)”.

Source: JGC

Wood awarded detailed design for Denison Mines’ flagship Uranium project in Canada

Wood has been awarded a detailed design engineering contract by Denison Mines Corp for the flagship Phoenix In-Situ Recovery (ISR) mining project planned in northern Canada, helping meet global demand for uranium.

The Phoenix deposit, part of the Wheeler River Project, owned jointly by Denison and JCU (Canada) Exploration Company Ltd, is the largest undeveloped uranium mining project located in the eastern portion of the Athabasca Basin region in Northern Saskatchewan.

Wood will design the uranium process plant, key infrastructure and communication systems, intending to design ways to accelerate production and optimize mineral processing. This award follows a feasibility study successfully conducted by Wood to evaluate the technical and economic viability of the ISR uranium mining operation for Phoenix.

Jim Shaughnessy, President of Minerals & Metals at Wood said: “We’re delighted to continue supporting Denison with the next phase of the Phoenix project. Wood’s involvement with the Phoenix feasibility study along with our industry-leading expertise in sustainable in-situ recovery techniques and decades of experience in uranium processing positions us as a valued partner in delivering detailed engineering design for Denison.”

Kevin Himbeault, Denison’s Vice President of Operations, commented: “In recognition of Wood’s performance leading the Phoenix feasibility study, we are pleased to announce the award of a detailed design engineering contract to Wood.

“Maintaining continuity through completion of the Phoenix feasibility study, front-end engineering design, and detailed design allows us to build on our combined knowledge and working relationship to deliver an engineering package that will ultimately support the construction and operation of the first ISR uranium mining operation in the Athabasca Basin.”

Detailed design will be delivered by Wood’s mineral processing design experts and is set to commence in 2024.

Source: WoodPlc

NEXTCHEM Awarded a Licensing and Equipment Supply Contract for a New Urea Plant in Egypt

MAIRE announced that NEXTCHEM (Sustainable Technology Solutions), through its nitrogen technology licensor Stamicarbon, has been awarded a licensing and equipment supply contract for a state-of-the-art urea melt and granulation plant in Egypt for El-Nasr Company for Intermediate Chemicals (NCIC). The plant is expected to have a production capacity of 1,050 metric tonnes per day of urea and will be located in an area 100 km southeast of Cairo.

The Stamicarbon’s technology selected by NCIC plays a pivotal role for the urea melt and granulation plant, especially in terms of process optimization, operational safety, enhancing yield and minimizing energy consumption. NCIC is one of the key players in the chemical and fertilizer industry in Egypt, embracing cutting-edge nitrogen technologies able to ensure superior product quality.

Alessandro Bernini, MAIRE CEO, commented: “This award is evidence of the reliability of our value proposition in offering nitrogen-based technology solutions worldwide. We are proud to contribute to NCIC’s industrial development plans in the fertilizer sector, thus consolidating our market leadership in licensing urea technology in Africa.”

Source: MAIRE

KT Kinetics Awarded €123 Million Worth EPC Contract by Eni for a Biorefinery Conversion Plant

MAIRE  announced that its subsidiary KT – Kinetics Technology (Integrated E&C Solutions) has been awarded an EPC contract by Italian Energy company Eni to build a hydrogen production plant at Eni’s Livorno refinery. 

The value of the contract is €123 million, and the project is scheduled for completion in 2026.

The plant to be designed and built by KT will process natural gas and biogenic feedstocks to create hydrogen for the production of biofuels for mobility at the Livorno site processing various biogenic feedstocks, mainly waste such as cooking oils and animal fats, and residues from the agribusiness industry. In addition, the plant is designed so that a residual CO2 capture unit can be implemented at a later stage.

The construction of the new unit is part of Eni’s project to convert its Livorno plant into a biorefinery.

Alessandro Bernini, MAIRE CEO, commented, “We are proud of this important achievement with Eni. MAIRE confirms once again its role as a provider of innovative technologies and integrated engineering services, contributing to the decarbonization of transport through increasing biofuel production.”

Source: MAIRE

ACCIONA has been Selected by Water Corporation to Build new Alkimos Desalination Plant in Australia

An ACCIONA-led consortium has been selected as the preferred proponent by Water Corporation, the largest water utility in Western Australia, to design, build, operate and maintain the future Alkimos Seawater Desalination Plant (ASDP) in Perth for ten years. The plant will have an initial (Stage 1) capacity of 150,000 m³ per day, with an additional 150,000 m³ per day, when required, under Stage 2.

The Stage 1 design and construct project is scheduled to deliver drinking water in 2028, as part of an overall Water Corporation program of works valued at AU$2.8 billion (€1,724 million) to secure drinking water to millions of Western Australians.

The project will be delivered as an alliance, comprising of Water Corporation, ACCIONA and Jacobs, and has safety and wellbeing at the forefront of delivery, as well as embedding sustainability in the design, delivery and operations of the plant.

The commissioning of ASDP – to be built within the Alkimos Water Precinct – will help the region manage the combination of declining rainfall and population growth. Since 1970, winter rainfall in southwest Western Australia has decreased by about 20 per cent while Perth’s population – currently 2.12 million – is expected to reach 2.9 million by 2031 and 3.5 million by 2050, making it Australia’s third largest city and significantly increasing the demand for drinking water.

Source: Acciona

Technip Energies has been awarded a FEED contract by Heidelberg Materials for its CCUS Project in Canada

Technip Energies announces it has been awarded a Front-End Engineering and Design (FEED) contract by Heidelberg Materials North America for its Carbon Capture, Utilization, and Storage (CCUS) project in Edmonton, Canada. This ground-breaking project will be the first full-scale application of CCUS in the cement sector.

The FEED contract covers the carbon capture technology for the Edmonton CCUS project. Powered by the Shell CANSOLV® CO2 capture system, the Technip Energies solution Canopy by T.ENTM, which will be the basis of the FEED study, offers cutting-edge performance based on regenerable amine technology.

This solution is part of Capture.Now, a strategic platform that brings under one umbrella all Technip Energies’ Carbon Capture, Utilization and Storage (CCUS) technologies and solutions needed to support customers on their decarbonization journey.

Christophe Malaurie, SVP of Decarbonization Solutions, Technip Energies, commented: “We are pleased to have been selected by Heidelberg Materials North America to provide the front-end engineering and design of this groundbreaking project in Canada. Leveraging our carbon capture solution powered by the Shell CANSOLV® CO2 capture system, we are committed to supporting the decarbonization of the cement industry and Heidelberg towards the production of net-zero cement.”

Joerg Nixdorf, Vice President Cement Operations, Northwest Region for Heidelberg Materials North America, stated: “We are excited to take this latest step in our journey to produce the world’s first net zero cement. With each milestone we come closer to realizing our vision of leading the decarbonization of the cement industry.”

Heidelberg Materials North America will be commissioning the world’s first net-zero cement plant at its Edmonton location by adding CCUS technology to an already state-of-the-art facility. The plant will eventually capture and store an estimated 1 million metric tons of carbon dioxide each year, which is the equivalent of taking 300,000 cars off the road annually. Subject to finalization of federal and provincial funding agreements, the company anticipates carbon capture to begin in late 2026.

Source: Technip Energies

TechnipFMC Awarded Substantial iEPCI™ Contract for Sparta Project

TechnipFMC has been awarded a substantial contract by Shell plc for the first integrated Engineering, Procurement, Construction, and Installation (iEPCI™) project to use high-pressure subsea production systems rated up to 20,000 psi (20K).

The Company will manufacture and install subsea production systems, umbilicals, risers, and flowlines for Shell’s Sparta development in the Gulf of Mexico. The tree systems will be Shell’s first to be qualified for 20K applications and are engineered to meet the high-pressure requirements of this greenfield development.

Jonathan Landes, President, Subsea at TechnipFMC, commented: “Sparta will combine our leading-edge subsea technology with our proven integrated execution model, iEPCI™, providing improved project economics. We are excited to be working with Shell on 20K technology.”

Source: TechnipFMC

ADNOC and BP Form Gas JV in Egypt

ADNOC and bp announced that they have agreed to form a new joint venture (JV) in Egypt. The JV (51% bp and 49% ADNOC) will combine the pair’s deep technical capabilities and proven track records as it aims to grow a highly competitive gas portfolio.

As part of the agreement, bp will contribute its interests in three development concessions, as well as exploration agreements, in Egypt to the new JV. ADNOC will make a proportionate cash contribution which can be used for future growth opportunities.

Musabbeh Al Kaabi, ADNOC Executive Director for Low Carbon Solutions and International Growth, said: “Today’s announcement with bp represents a significant step forward as ADNOC builds its international natural gas portfolio. This progressive joint venture partnership will enhance Egyptian energy security and the economic potential of the region’s most populous Arab country. Building on our long-standing strategic partnership with bp, ADNOC looks forward to continue exploring other opportunities as we collectively seek to decarbonize our operations and lead a just and equitable energy transition.”

bp’s William Lin, Executive Vice President of Regions, Corporates & Solutions, said: “This dynamic JV offers a platform for international growth that advances our longstanding and strategic partnership with ADNOC that spans over five decades. Together, we will build on the 60 years of safe and efficient operations of bp and its partners in Egypt, and continue to produce and deliver secure, lower-carbon energy in the form of natural gas to the country.”

Source: ADNOC

Technip Energies Awarded PDP for Proposed Post-Combustion Carbon Capture Project, UK

Technip Energies has been selected by Uniper to provide a Process Design Package (PDP) for the post-combustion carbon capture project at their Combined Cycle Gas Turbine (CCGT) power station on the Isle of Grain in Southeast  England, to potentially capture over 2 million tonnes of CO2 per year.

The contract covers the process design for the CO2 capture, conditioning, liquefaction, and temporary storage facility. The PDP will also include the design information required to complete the final engineering of the plant.

Uniper’s plans focus on retrofitting post-combustion carbon capture technologyon up to three units of the existing 1,326MW Combined Cycle Gas Turbine (CCGT) plant at Grain power station in the Southeast of England.The capturedCO2 would be transported by shipping, or pipeline, to permanent storage offshore in the seabed.

In this first phase, Technip Energies will provide a unique solution capable of being applied to each of the three gas turbines, leveraging the proven Shell CANSOLV® CO₂ Capture System, as well as Technip Energies licensing expertise and deep experience in project execution.

In the perspective of a mid-2020s final investment decision, the next step for Technip Energies, if selected, will be to provide the full front-end engineering design (FEED) package for the project.

Christophe Malaurie, SVP Decarbonization Solutions of Technip Energies, commented: “We are very energised to contribute to Uniper’s ambition to make their European power generation portfolio 80% carbon neutral by 2030. This ambitious project is leading the way of the UK’s national grid decarbonisation. By leveraging our capabilities in carbon capture projects and technology integration, we are committed to making this project a success, playing an active role in the journey towards a low-carbon future.”

Ian Rogers, Head of Asset Improvement and Making Net Zero Probable of Uniper, said: “The award of the PDP contract is a significant milestone in the development of our plans to decarbonise electricity production at one of the most efficient gas CCGT plants in our fleet – Grain power station. It would not only help meet Uniper’s ambitious strategy to generate more than 80 per cent of our installed power capacity from carbon free sources by 2030 but could also help to support the UK’s transition to a net zero future by removing millions of tonnes of CO2 per year whilst continuing to provide flexible and reliable power to the national grid. We look forward to working with Technip Energies during this first phase of the design competition, to identify the most effective technology solutions to help deliver Uniper’s and the UK’s decarbonisation strategies.”

Nick Flinn, Vice President Decarbonisation Technologies, Shell Catalysts & Technologies, commented: “We are very proud to be providing Shell’s CANSOLV CO2 capture technology together with Technip Energies, for Uniper’s first CCS project in the UK. Shell’s CANSOLV CO2 capture technology has been in commercial operation at large-scale for over a decade, including a low-pressure application at SaskPower in Canada, where it is designed to capture up to 1 Mt/y of CO2.  Shell is excited to bring this experience, together with learnings from recent projects, to deliver an optimised design for this key project that will drive the UK towards its decarbonisation targets.”

Source: Technip Energies

Bilfinger Secures Major Contract from INEOS for Forties Pipeline System Maintenance

Bilfinger has been awarded a large-scale maintenance contract by INEOS FPS. The aim of the contract is to ensure the reliability of the critical Forties Pipeline System (FPS), which transports and processes oil and gas from the North Sea. The 3-year contract with an option of a further 2-year extension marks the continuation of a long-standing partnership that has existed for over a decade.

Under the agreement, Bilfinger will provide access, insulation, coating and fireproofing services for projects as well as maintenance work for both the onshore and offshore facilities of the 169-kilometer pipeline system. The contract, which took effect at the beginning of January 2024, will be executed by Bilfinger’s Maintenance and Insulation, Scaffolding and Corrosion Protection (ISP) business units. Around 130 Bilfinger employees will be on site every day to ensure efficient and comprehensive service delivery. INEOS will benefit from the strong regional presence and expertise of the executing business unit Bilfinger UK.

“Our ambition to be the number one partner in efficiency and sustainability, together with our longstanding investment in development of local personnel, positions us perfectly to support INEOS extend the life of the critical FPS infrastructure while minimizing its environmental impact,” says Sandy Bonner, President Engineering & Maintenance UK at Bilfinger. “In our longstanding partnership, we continue to share the commitment to continuously improve the effectiveness of maintenance and the efficiency of service delivery; continually improving asset reliability and meeting operational efficiency challenges.”

Since 1975, the FPS has been the vanguard of the UK’s North Sea oil and gas industry – safely transporting and processing billions of barrels of crude oil from 85 offshore oil fields. Under INEOS ownership, the FPS has entered a new phase in its lifecycle to prolong the life of the system by at least 20 years supporting North Sea production into the 2040s, underwritten by a strategy with three key elements: Sustainability, Investment and Local Community.

To reach this 2040+ goal requires targeted investment in the infrastructure, critical to ensuring they are still operating efficiently, safely and sustainably for the next twenty years and beyond. In 2018 INEOS FPS announced a £500million strategic investment in the FPS to reconfigure the system, extend its life and continue to support North Sea oil and gas production, sustainably, into the long-term.

Bilfinger’s comprehensive services are supporting its customer in this mission. The company’s maintenance services not only optimize asset performance, but also sustainably extend the lifetime of the pipelines. In addition, by ensuring proper insulation and sealing, energy consumption is reduced and environmental impact is minimized.

“We look forward to continuing this collaboration. Bilfinger’s drive for continuous improvement and its ability to respond flexibly to our priorities and strategic objectives have been key contributors,” says Ewan MacAngus Operations Director of INEOS FPS.

As a strategic partner to the process industry, Bilfinger is a driving force in the industry’s transition to greater efficiency and sustainability in existing plants and new technologies. With more than 60 years of experience in the oil and gas industry the Group offers comprehensive services for the entire life cycle of onshore and offshore facilities from a single source.

Source: Bilfinger

Mitsubishi Power Receives Order for Uzbekistan’s Navoi 3 Power Plant Project

Mitsubishi Power, a power solutions brand of Mitsubishi Heavy Industries, Ltd. (MHI), has received an order for one system of core equipment for a high-efficiency power generation facility, including a state-of-the-art M701JAC (J-series Air-Cooled) gas turbine, for the third facility planned to be built at the Navoi Power Plant (Navoi 3) by JSC Thermal Power Plants, the state electric power corporation of the Republic of Uzbekistan. The planned system will comprise a gas turbine combined cycle (GTCC) to generate 600 megawatts (MW) of electric power and 200 Gcal/h of heat. Commercial operation is scheduled to start in 2026. This is the third order received by Mitsubishi Power for GTCC equipment for the Navoi Power Plant.

The Navoi Power Plant is located approximately 360 km southwest of the capital of Tashkent. Mitsubishi Power had previously supplied GTCC power generation equipment for the nearby power plants Navoi 1 and Navoi 2, which started operations in 2013 and 2019, respectively. Navoi 3 will also utilize gas-fired GTCC power generation to supply electricity to the surrounding area, as well as industrial steam and district heating to the Navoi Free Economic Zone (Navoi FEZ).

In addition to supplying the gas and steam turbines, Mitsubishi Power will handle the design, procurement, manufacture, and commissioning of the core components of the power generation facilities and major auxiliary equipment, such as air-cooled condensers and gas compressors. The generator will be manufactured by Mitsubishi Electric Corporation.

Mitsubishi Power has received many orders for large-scale gas turbines in Uzbekistan, including state-of-the-art JAC and F series. This latest project is the 13th such order and the fifth for a JAC series gas turbine, giving Mitsubishi Power a market share of about 90% large-scale gas turbines in the country. In addition, the company supports the country’s diverse power and heating needs. This has included fulfilling a series of orders for H-25 small- and medium-sized gas turbines for a city-based distributed natural gas-fired cogeneration facility being constructed in Tashkent. Through its projects, Mitsubishi Power has contributed to the stable supply of electricity in Uzbekistan by maintaining high reliability through efficient maintenance services.

Going forward, Mitsubishi Power will continue to support the stable and efficient operation of the electric power business for the realization of energy transition in Uzbekistan. The company will make a concerted effort as a corporate group to further focus its resources into promoting the adoption of high-efficiency, environmentally friendly GTCC power generation equipment, and contributing to the stable supply of electric power indispensable to economic development worldwide, and helping to achieve a sustainable, decarbonized world.

Source: Mitsubishi Power

Worley & Mitsubishi Heavy Industries (MHI) has been Awarded the FEED Contract for a Carbon Capture Facility in UK

Worley in partnership with Mitsubishi Heavy Industries (MHI) Group has been awarded the front end engineering and design (FEED) services.

It is first of its kind in the UK, the project will support the development of a ground breaking carbon capture facility at Heidelberg Materials’ cement works in Padeswood, North Wales, UK.

The FEED contract comes after previously working with MHI Group on several carbon capture projects, including the pre-FEED for the Padeswood project.

The FEED project stage will support Heidelberg Materials UK with securing UK government approval, achieving a positive final investment decision and enabling the engineering, procurement and construction (EPC) stage to commence in the first quarter of 2025.

Work will be carried out by our teams in London, Manchester, Aberdeen and Glasgow. With further support from our global team of carbon capture experts.

The Padeswood project has been selected as a Track 1 capture project by the UK Government and is a key establishing project within the HyNet industrial cluster. Once operational, it is anticipated to capture up to 800,000 tonnes of CO2 annually, the equivalent of taking 320,000 cars off the road. The project aims to play a crucial role in the decarbonization efforts of the UK cement industry.

Simon Willis, CEO, Heidelberg Materials UK, said: “This is a decisive next step in our plans to install carbon capture technology at our Padeswood cement works. Once operational, it will provide net zero building materials for major projects across the country, enabling us to help decarbonize the construction industry and meet our ambition to become a net zero business.”

“Securing this contract is not only testament to the strength of our relationships with Heidelberg Materials UK and MHI but also reflects our execution of the pre-FEED and our team’s expertise in delivering FEED services for first of a kind CCUS facilities. Padeswood is a landmark project in the UK’s decarbonization strategy and aligns with our commitment to making sustainable transformation a reality,” says Marino Barbi, Senior Vice President, UK.

Source: Worley

Aker Solutions awarded FEED for Celsio’s CCS Terminal at the port of Oslo

Aker Solutions has been awarded a front-end engineering and design (FEED) contract by Hafslund Oslo Celsio (Celsio) to develop the CO2 terminal for intermediate storage and export to ship at the port of Oslo, Norway.

The FEED award follows Celsio’s cost reduction initiative for the Oslo CCS project and will serve the capture plant at the Celsio waste-to-energy plant at Klemetsrud with a transitional CO2 storage facility at the port of Oslo for loading to ship and transporting the captured CO2 to the Northern Lights terminal at Øygarden on the west coast of Norway.

Celsio’s waste incineration plant emits a significant proportion of the city’s total CO2 emissions. The Celsio CCS project and the Northern Lights storage are part of Longship, the Norwegian Government’s carbon capture and storage project, which will also include CO2 captured at Heidelberg Materials’ cement plant in Brevik, where the carbon capture plant is delivered by Aker Carbon Capture and Aker Solutions.

In November 2023, Aker Solutions and Aker Carbon Capture were awarded a FEED contract by Celsio to develop carbon capture at the waste-to-energy facility at Klemetsrud.

“At Aker Solutions, we have a growing track record in supporting our customers across the entire CCS value chain. From capture and transportation to permanent storage, we provide innovative solutions and work with leading partners to support CCS developments across the globe. We are committed to build on this expertise and further strengthen our relationship with Celsio. We are proud to have engineered a cost efficient and effective layout which enabled Celsio to proceed with the next phase of this landmark development,” said Henrik Inadomi, executive vice president, new energies at Aker Solutions.

“We are pleased to have Aker Solutions on board for the second phase of the FEED for our carbon capture project. Today’s announcement is a significant decision regarding transportation of our future captured CO2. However, it is not smooth sailing towards a new investment decision. We are still depending on improved framework conditions and income potential before the realization of carbon capture in Oslo,” says Knut Inderhaug, Managing Director at Hafslund Oslo Celsio.

Since April 2023, the Celsio carbon capture project has been through a cost reduction phase after the previous project cost estimate exceeded the investment budget. As part of the cost reduction phase, new vendors were brought in to present alternative solutions that could lower costs. Based on the concept study conducted, Aker Solutions were selected to perform a FEED for the CO2 terminal at Oslo port, with the framework for a possible EPCIC. 

Celsio’s waste-to-energy facility at Klemetsrud treats household waste, and waste from industry and enterprises. The waste treated at the facility consists of approximately 50 percent biogenic CO2, which creates the possibility to deliver negative emissions. The carbon capture project can provide unique learnings for the European waste-to-energy industry, which includes close to 20 facilities in Norway and around 500 similar facilities across Europe.

Source: Aker Solutions

L&T Wins EPCC Contract for Hydrocarbon Business

The Hydrocarbon vertical (L&T Energy Hydrocarbon – LTEH) of Larsen & Toubro (L&T) has recently secured a large onshore project from IndianOil Adani Ventures Limited.

The scope of work includes engineering, procurement, construction, and commissioning of Offsite Tankages, Bullets and other associated facilities on Lump Sum Turnkey basis.

LTEH is executing four prestigious projects under IOCL’s P-25 expansion programme. The earlier awarded projects under program-25 include Residue Hydro Cracker Unit (RHCU), Diesel Hydrotreater (DHDT) and Reactor Regenerator Package (RR).

Organised under Offshore, Onshore EPC, Modular Fabrication, Advanced Value Engineering & Technology (AdVENT), and Offshore Wind Farm Business Groups, LTEH offers integrated design-to-build solutions across the hydrocarbon sector to domestic and international customers. With over three decades of rich experience, LTEH has been setting global benchmarks in all aspects of project management, corporate governance, quality, health safety environment (HSE) and operational excellence.

Source: Larsen & Toubro

Tecnimont Awarded a Feed For an Integrated Green Hydrogen and Ammonia Plant in Portugal

MAIRE (MAIRE.MI) announces that Tecnimont (Integrated E&C Solutions) has been awarded a FEED contract by MadoquaPower2X to develop an integrated green hydrogen and green ammonia plant located in the industrial zone of Sines, Portugal. MadoquaPower2x is a consortium comprised of Madoqua Renewables, Power2X, and Copenhagen Infrastructure Partners (CIP), through its Energy Transition Fund.

The project involves the production of green hydrogen using alkaline-water electrolyzer technology and the production of green ammonia through the Haber-Bosch process. Green ammonia will be transported by pipeline to the Port of Sines and loaded for export and/or used as maritime fuel.

Tecnimont’s scope of work entails the design of the electrolyzers’ integration, air separation unit for nitrogen production, ammonia production plant, as well as storage and ship loading facilities. As part of the agreement, Tecnimont will also submit an Engineering, Procurement and Construction proposal for the construction activities of the plant. The Final Notice to Proceed is expected by 22 March 2024.

This award follows a PRE-FEED carried out by NextChem Tech, MAIRE’s Sustainable Technology Solutions subsidiary and is further proof of the synergies and cross-fertilization at the base of MAIRE’s positioning as a leading Integrated Technology and E&C solutions provider. As such, Tecnimont will provide its EPC expertise leveraging on NextChem Tech’s technological competences for hydrogen production and storage.

MadoquaPower2X will use renewable energy generated by solar and wind assets under development in Portugal and up to 500 MWs of electrolysis capacity to produce up to 1,200 MTPD of green ammonia. It will be the first facility in Sines, the largest industrial and logistic hub in the Iberian Peninsula, to produce clean energy at an industrial scale and with the highest environmental and safety standards. The project is geared towards the set-up of an export energy carrier value chain between the Port of Sines (Portugal) and Northwestern European Hub.

Alessandro Bernini, MAIRE CEO, commented: “The synergic approach among our Group’s companies is the key success factor of MAIRE’s value proposition. This award shows the Group’s strength in the green hydrogen and ammonia production segment, which helps supporting the transition to a clean energy system”.

Source: Maire Tecnimont

McDermott Secures Two EPCIC Contracts for North Oil Company’s Ruya Development Project

McDermott has been awarded two contracts from North Oil Company (NOC) to deliver engineering, procurement, construction, installation, and commissioning (EPCIC) for packages 11 and 13 of the Ruya Development Project, as part of the expansion of the Al-Shaheen field, Qatar’s largest oil field.

The Package 11 mega* contract scope, awarded to a consortium of McDermott and Qingdao McDermott Wuchuan (QMW), includes installation of nine satellite wellhead platforms and jackets in two offshore campaigns. The Package 13 substantial* contract, awarded to a consortium of McDermott and Hyundai Heavy Industry (HHI), is for EPCIC of one 25,000 metric ton central processing platform, flare platform and bridges.

“These awards build on our successful execution of the front-end engineering design (FEED) project—one of the largest FEEDs in McDermott’s 100-year history—completed in just over 12 months,” said Mike Sutherland, McDermott’s Senior Vice President, Offshore Middle East. “We will continue to earn the confidence of QatarEnergy and TotalEnergies by delivering strategically significant energy infrastructure projects in the Middle East.”

“We have been on this journey with NOC since our Doha operating center started the pre-FEED in 2021,” said Neil Gunnion, Qatar Country Manager and Vice President, Operations. “This team of experts will now lead the execution of EPCIC work, leveraging their robust experience and in-depth knowledge of Qatar’s offshore sector for the successful expansion of the Al-Shaheen field.”

McDermott defines a mega contract as being over USD 1.5 billion, and a substantial contract as being between USD $500 and $750 million.

Source: McDermott 

Technip Energies Wins FEED Contract for Harbour Energy’s New Viking CCS Project in the UK

Technip Energies has been awarded a Front-End Engineering Design (FEED) contract for the Viking CCS project, the Humber-based CO2 transportation and storage network led by Harbour Energy, together with partner bp.

Located in the Humber, the most industrialised area of the UK with its biggest source of CO2emissions, the project is expected to play a pivotal role in creating a globally leading CCS sector in the UK, contributing to the Government’s target for net zero emissions by 2050.

The Viking CCS initiative is a project focused on the transportation and storage of the captured CO2 into the depleted Viking gas fields. The project aims to reduce UK emissions by 10 million tonnes annually by 2030, increasing to 15 million tonnes per year by 2035.

Technip Energies, supported by its subsidiary Genesis, will provide FEED services for the CO2 transportation system, including the CO2 handling station, onshore and offshore pipeline, and a NPAI (Not Permanently Attended Installation) platform.

Charles Cessot, SVP T.EN X – Consulting and Products of Technip Energies, commented: “We are proud to be supporting the UK’s transition to a more sustainable future. Our involvement in the Viking CCS project will help reduce the UK’s carbon emissions and emphasises our commitment to sustainable energy solutions. We are excited to collaborate with Harbour Energy and contribute our expertise in FEED services to this initiative.”

Harbour Energy’s Viking CCS Project Director Graeme Davies said: “We’re delighted to be working with Technip Energies to help deliver another important milestone for the Viking CCS project. The Humber region has long been a global leader in the energy sector, and Viking CCS will help to protect around 20,000 jobs in local industries, while also creating up to 10,000 jobs during construction across all Cluster projects.”

Jim Todd, bp JV Manager for Viking CCS, said: “After three years in development, the Viking CCS project is now entering the FEED phase. This is a significant step in the journey of any project, and we are excited to welcome Technip Energies as the FEED contractor, paving the way for large-scale CCS in the South Humber and North Lincolnshire region.”

Source: Technip Energies

Qatarenergy has announced the award Of $6 Billion EPC contracts for offshore Al-Shaheen Field

QatarEnergy has announced the award of the four main Engineering, Procurement, Construction, and Installation (EPCI) contract packages related to the next development phase of the offshore Al-Shaheen field (Qatar’s largest oil field) to increase production by about 100,000 barrels of oil per day (BPD).

The award is part of Project Ru’ya (vision in Arabic), which is the third phase of Al-Shaheen’s development since North Oil Company, a joint venture between QatarEnergy (70%) and TotalEnergies (30%), took over the field’s operation in July 2017. Project Ru’ya, which will develop more than 550 million barrels of oil, will be executed over a period of 5 years with first oil expected in 2027. The project includes the drilling of more than 200 wells and the installation of a new centralized process complex, nine remote wellhead platforms, and associated pipelines.

The four EPC packages, with varying scopes of work, valued in total at more than six billion dollars, comprise:

(i) The EPC package for 9 wellhead platforms valued at about $2.1 billion and awarded to a consortium of McDermott Middle East Inc. and Qingdao McDermott Wuchuan Offshore Engineering Co.

(ii) The EPC package for a Central Processing Platform valued at about $1.9 billion and awarded to a consortium of McDermott Middle East Inc. and Hyundai Heavy Industries.

(iii) The EPC package for a riser platform valued at about $1.3 billion and awarded to Larsen & Toubro Limited.

(iv) The EPC package for subsea pipelines and cables valued at about $900 million and awarded to China Offshore Oil Engineering Co (COOEC).

His Excellency Mr. Saad Sherida Al-Kaabi, the Minister of State for Energy Affairs, the President and CEO of QatarEnergy, welcomed the award of the contract packages as an important milestone in the development of the State of Qatar’s largest oil field. His Excellency said: “By awarding these contracts, we are taking an important step towards realizing the full potential of Al-Shaheen filed, which produces around half of Qatar’s crude oil.

”His Excellency Minister Al-Kaabi added: “I would like to thank North Oil Company and our longtime strategic partner TotalEnergies for their great efforts towards unlocking the true potential of Qatar’s hydrocarbon resources and maximizing value from Al-Shaheen field through the implementation of world-class development and operational excellence programs.

”Al-Shaheen field is located 80 kilometres offshore Qatar and is among the world’s largest in terms of “oil in place”. The field commenced commercial production in 1994 and underwent significant development to reach an oil production rate of 300,000 bpd in 2007.

Source: QatarEnergy